Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 - Manual (Page 21)

21 Pneg-1413 4-Leg Towers
ATTACHING TOWER
SECTIONS TOGETHER
STC00185
(H-Braces)
STC00183
(Vertical X-Braces)
STC00181
(Column Splice Plates)
S-3729
(1/2" Hex
Nuts)
S-3728
(1/2" x 1-1/2"
HHCS Bolts)
S-3728
(1/2" x 1-1/2"
HHCS Bolts)
1. Line up Top Section Columns with Column
Splice Plates (STC00181) of bottom section.
2. Attach together using (2) 1/2" x 1-1/2" HHCS
bolts & nuts per splice plate.
3. Attach Vertical X-Braces (STC00183) and H-
Braces (STC00185) to columns as shown
using 1/2" x 1-1/2" HHCS bolts & nuts.
NOTE: H-Braces (STC00185) should be
installed on top of the Vertical X-Braces
(STC00183). Some H-Braces may need to be
removed to install the Vertical X-Braces under
the H-Braces.