Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1413 - Manual (Page 43)

43 Pneg-1413 4-Leg Towers
OFFSET PLATFORM ASSEMBLY (CONT.)
S-3729
(1/2" Hex
Nuts)
S-7534
(1/2" x 1-1/4"
HHCS Bolts)
STC00199
(Handrail
Post Clip)
STC00189
(Rest Platform
Short Frame)
STC00188
(Rest Platform
Long Frame)
STC00198
(Handrail Post)
STC00189
(Rest Platform
Short Frame)
STC00187
(Rest Platform
Kneebrace)
S-3729
(1/2" Hex
Nuts)
S-7534
(1/2" x 1-1/4"
HHCS Bolts)
7. Attach the (3) Rest Platform
Short Frames (STC00189 &
STC00189-A) to the Rest
Platform Long Frame
(STC00188) and the Hand-
rail Post (STC00198) as
shown in Fig. OP6. Use
1/2" x 1-1/4" HHCS Bolts
and nuts.
8. Attach the Handrail Post
Clips (STC00199) to the
Rest Platform H-Brace
(STC00186) using (2) 1/2" x
1-1/4" HHCS bolts & nuts.
9. Attach the Rest Platform
Kneebraces (STC00187) to
the Rest Platform Short
Frames (STC00189) using
(2) 1/2" x 1-1/4" HHCS bolts
& nuts as shown in Fig. OP7
10. Attach the Rest Platform
Kneebraces (STC00187) to
the Handrail Post Clips
(STC00199) using (2) 1/2" x
1-1/4" HHCS bolts & nuts.
(See Fig. OP7)
STC00186
(Rest Platform
H-Brace)
FIG. OP6
FIG. OP7
STC00189-A
(Rest Platform
Short Frame)