Grain Systems Bin Accessories PNEG-1785 - Manual (Page 52)

4. Assembly Instructions
52 PNEG-1785 NCHT “X” Series Ladders
Ladder to Platform Mounting Details
1. Use special bracket LDR-5344 (B) on the last C-channel. Brackets must be assembled in the
orientation shown in Figure 4AP .
Attach LDR-5344 (B) to LDR-5168 (A) using the bottom two (2) holes of LDR-5168. Attach 3/8" x 1"
bolt (S-7927) (D) and flange nut (S-9373) (E).
Attach wall brace assembly (LDR-5197) to C-channel (LDR-5342) using 5/6" x 3/4" bin bolt
(S-275) (F) and flange nut (S-3611) (G).
Assemble together two (2) wall braces (LDR-5197) using 5/16" x 3/4" bin bolt (S-275) (F) and
flange nut (S-3611) (G). Only connect in two (2) holes.
Attach wall brace (LDR-5197) to ladder bracket (LDR-5344) (B) using 5/16" x 3/4" bin bolt
(S-275) (F) and flange nut (S-3611) (G).
Attach ladder standoff (LDR-5143) to ladder bracket (LDR-5169) (C) using 5/16" x 3/4" bin bolt
(S-275) (F) and flange nut (S-3611) (G).
NOTE: Bracket must be placed in same orientation as the figure.
Figure 4AP
Ref # Part # Description
A LDR-5168 Ladder Sidewall Angle
B LDR-5344 Ladder Bracket
C LDR-5169 Ladder Bracket
D S-7927 3/8" x 1" Flange Bolt
E S-9373 3/8" Flange Nut
F S-275 5/16" x 3/4" Bin Bolt
G S-3611 5/16" Flange Nut