Grain Systems Bin Accessories PNEG-1785 - Manual (Page 27)

4. Assembly Instructions
PNEG-1785 NCHT “X” Series Ladders 27
Right Hand Ladder Assembly
1. Figure 4O shows the assembly of the platform handrails. These must be attached using
5/16" hardware.
a. Attach large and small intermediate handrails to platform posts using 5/16" x 3/4" bin bolt
(S-275) (H) and flange nut (S-3611) (I).
b. Attach long and short upper handrails to platform posts using 5/16" x 2" bolt (S-7877) (J) and
flange nut (S-3611) (I).
c. Attach short intermediate handrail to platform posts using 5/16" x 3/4" bin bolt (S-275) (H) and
flange nut (S-3611) (I).
d. Attach inside top handrail to platform posts using 5/16" x 2" bolt (S-7877) (J) and flange
nut (S-3611) (I).
Figure 4O
Ref #
Part #
Description
15'-21' 24'-36'
A STX-0038 STX-0038 Platform Handrail Short
B LDR-5375 LDR-5352 Platform Handrail Long
C STX-0147 STX-0147 Inside Top Handrail
D LDR-5366 LDR-5366 Short Intermediate Handrail
E LDR-5352 LDR-5352 Platform Handrail Long
F LDR-4088 LDR-4088 Small Intermediate Handrail (Field Cut to Length)
G LDR-4087 LDR-4087 Large Intermediate Handrail (Field Cut to Length)
H S-275 S-275 5/16" x 3/4" Bin Bolt
I S-3611 S-3611 5/16" Flange Nut
J S-7877 S-7877 5/16" x 2" Flange Bolt
K Place self-drilling screw on bottom at overlap.