Grain Systems Bin Accessories PNEG-1785 - Manual (Page 32)

4. Assembly Instructions
32 PNEG-1785 NCHT “X” Series Ladders
6. Assemble narrow safety cage bracket, cage hoops and cage splice brackets to the ladder flares and
platform posts. This must all be assembled at the same time using 5/16" hardware. (See Figure 4T.)
a. Assemble safety cage hoop splices to the platform posts using 5/16" x 3/4" bin bolt (S-275) (E)
and flange nut (S-3611) (F) to handrails.
b. Assemble narrow safety cage brackets to formed ladder flare using 5/16" x 1-1/4" bolt (S-277)
(G) and flange nut (S-3611) (F). Attach safety cage hoops.
c. Assemble safety cage standard hoops, narrow safety cage brackets and formed ladder flare to
the safety cage hoop splices using 5/16" x 1-1/4" bolt (S-277) (G) and flange nut (S-3611) (F).
Figure 4T
Ref # Part # Description
A LDR-5167 Safety Cage Hoop Splice
B LDR-5164 Safety Cage Hoop Standard
C LDR-5163 Safety Cage Narrow Bracket
D LDR-5161 Formed Ladder Flare
E S-275 5/16" x 3/4" Bin Bolt
F S-3611 5/16" Flange Nut
G S-277 5/16" x 1-1/4" Flange Bolt