Grain Systems Bin Accessories PNEG-1785 - Manual (Page 20)

4. Assembly Instructions
20 PNEG-1785 NCHT “X” Series Ladders
7. Figure 4G shows the assembly of the platform handrails. These must be attached using
5/16" hardware.
a. Attach large and small intermediate handrails to platform posts using 5/16" x 3/4" bin bolt
(S-275) (C) and flange nut (S-3611) (D).
b. Attach long and short upper handrails to platform posts using 5/16" x 2" bolt (S-7877) (H) and
flange nut (S-3611) (D).
c. Attach short intermediate handrail to platform posts using 5/16" x 3/4" bin bolt (S-275) (C) and
flange nut (S-3611) (D).
d. Attach inside top handrail to platform posts using 5/16" x 2" bolt (S-7877) (H) and flange
nut (S-3611) (D).
Figure 4G
Ref #
Part #
Description
15'-21' 24'-36'
A LDR-5366 LDR-5366 Short Intermediate Handrail
B STX-0147 STX-0147 Inside Top Handrail
C S-275 S-275 5/16" x 3/4" Bin Bolt
D S-3611 S-3611 5/16" Flange Nut
E LDR-4088 LDR-4088 Small Intermediate Handrail (Field Cut to Length)
F LDR-4087 LDR-4087 Large Intermediate Handrail (Field Cut to Length)
G STX-0038 STX-0038 Platform Handrail Short
H S-7877 S-7877 5/16" x 2" Flange Bolt
I LDR-5352 LDR-5352 Platform Handrail Long
J LDR-5374 LDR-5352 Platform Handrail Long
K Place self-drilling screw on bottom side at overlap.