Grain Systems Bin Accessories PNEG-1785 - Manual (Page 30)

4. Assembly Instructions
30 PNEG-1785 NCHT “X” Series Ladders
4. Attach wall angle to the sidewall sheet using the hole 9-3/8" for the platform with 3/8" hardware.
Assemble the wall bracket to the wall angle using 3/8" x 1" bolt (S-7927) (A) and nut (S-9373) (B)
and tighten. Adjust connection of wall bracket to standoff bracket if needed. Also adjust length of
standoff bracket if needed.
(See Figure 4R.)
Figure 4R
Ref # Part # Description
A S-7927 3/8" x 1" Flange Bolt
B S-9373 3/8" Flange Nut
C LDR-5168 Ladder Sidewall Angle
D LDR-5173 Platform Wall Bracket