beautypg.com

Grain Systems Unload Augers PNEG-1555 User Manual

Page 24

background image

24 PNEG-1555 8" Commercial Vertical Drive Unit - Dual Drive

4. Installation

AA. Bolt the belt guard loosely to the belt guard brackets with four (4) 3/8'' x 3/4'' flange bolts.

Figure 4V

AB. Center the belt guard slot with the motor shaft and the auger drive shaft. Make sure the belt

guard DOES NOT contact the pulleys, belts, or bearing, and tighten the belt guard to the belt
guard mounting brackets.

AC. Once the belt guard is secured, slide the bottom belt guard cover back into place and secure it

with the 3/8'' x 3/4'' flange bolt previously removed.