beautypg.com

Grain Systems Unload Augers PNEG-1555 User Manual

Page 18

background image

18 PNEG-1555 8" Commercial Vertical Drive Unit - Dual Drive

4. Installation

B. Slide the bearing plate assembly over the drive shaft and line it up with the open holes in the

head plate. Bolt the bearing plate assembly to the head plate using four (4) 5/16" x 1" bolts and
serrated flange nuts.

Figure 4L

C. Place the lock collar onto the drive shaft. Push the lock collar to the bearing and make them

interlock. Using a hammer and center punch, drive the lock collar clockwise onto the drive shaft.

Figure 4M