beautypg.com

Grain Systems Unload Augers PNEG-1555 User Manual

Page 15

background image

4. Installation

PNEG-1555 8" Commercial Vertical Drive Unit - Dual Drive

15

2. Assembling the motor mount plate to the new head plate.

A. Position the motor mount plate over the new head plate so that the motor mount plate is almost

flush with the new head plate, and so that the curved side of the motor mount plate is on the
left side of the new head plate.

Figure 4F

B. Bolt the motor mount plate to the head plate using four (4) 1/2" x 1-1/2" bolts and serrated

flange nuts.

Figure 4G

See also other documents in the category Grain Systems Equipment: