Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Power Systems- PowerPack & Stinger w EconoMind ('03-07) Compatible w_ Optional PowerPDA - Manual (Page 19)

96811 v.10.0
19
20.
Remove the stock intake elbow
and gasket.
21.
cover the compressor outlet on
the turbocharger and the inlet to the
intake manifold to prevent debris from
getting into either of these areas.
22.
Remove the stock cAc.
MODIFICATIONS TO MAkE ROOM
FOR THE BANkS TECHNI-COOLER
SySTEM
23.
For 2005-07 4-wheel drive
equipped vehicles only: Remove
the two retaining clips that attach the
wire harness to the metal battery tray.
24.
Remove the driver’s side metal
battery tray [(3x) 13mm socket].
25.
Drill a 3 ⁄ 8 inch hole as shown in
Figure 14.
26.
Reinstall the battery tray as
shown in Figure 15 with the supplied
1 ⁄ 2 ” spacer and longer supplied 8mm
bolts. Torque the bolts to 12 ft-lbs. Figure 15
Figure 14