Rough Country 650 - Manual (Page 4)

Kit Contents
650N2 Kit Box
4– Coil Spring Spacers
2-Fr Poly Bump Stops
2-Bump Stop Spacers
2-10mm x 80mm Bolt
2-10mm Flat Washers
2-Fr Nitro N2.0 Shocks
2–Rr Nitro N2.0 Shocks
Post Installation
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mo-
bile, fixed and heated members. Check steering for interference and proper working order. Test brake sys-
tem.
2. Perform steering sweep. The distance between the tire sidewall and the brake hose must be checked
closely. Cycle the steering from full turn to full turn to check for clearance. Failure to perform inspections
may result in component failure.
3. Re torque all fasteners after 500 miles. Visually inspect components and re torque fasteners during routine
vehicle service.
4. Readjust headlights to proper settings.
Maintenance Information
It is the ultimate buyers responsibility to have all bolts/nuts checked for tightness after the first 500 miles and
then every 1000 miles. Wheel alignment steering system, suspension and driveline systems must be inspected
by a qualified professional mechanic at least every 3000 miles