Rough Country 1062 User Manual
Jeep jk modular winch mount

JEEP JK MODULAR WINCH MOUNT
Thank you for choosing Rough Country for all your suspension needs.
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have all
needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
PRODUCT USE INFORMATION
Please read instructions before beginning installation. Check the kit hardware against the parts list and product layout.
Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure you
have needed tools.
If questions exist we will be happy to answer any questions concerning the function and correct use of this product.
The installer must verify that the mounting kit does not interfere with the factory air bag sensors, which must not be relo-
cated or modified in any way. The vehicles air bag system may not operate properly if the winch mounting kit is not
mounted in compliance with the vehicle manufacturers recommendations.
92105900
Tools Needed:
3/4” Socket / Wrench
8mm Allen Head Bit / Wrench
18mm Socket / Wrench
Phillips Screwdriver
Part#1059 Kit with
caps & Plate
Kit Contents:
1059-Winch Mount w/ Caps:
Winch
Mount
1-Dr Side Cap
1-Pass
Side
Cap
2-Flag
Nuts
OR
1062-Winch Mount w/ Light End
Caps:
Winch
Mount
1-Dr Side Cap w/ Light Mount
1-Pass Side Cap w/Light Mount
1-Poly Bag
1059BAG1-End Caps
8-1/2” x 1 1/2” Allen Head Bolts
2-1/2” x 1 1/2” Bolts
10-1/2”
Flat
Washers
8-1/2”
Lock
Nuts
2-Flag Nuts
OR
1062BAG-Light Mount Caps
8-1/2” x 1 1/2” Allen Head Bolts
2-1/2” x 1 1/2” Bolts
10-1/2”
Flat
Washers
8-1/2”
Lock
Nuts
2-Flag Nuts
8-#10 X 24 Nut
Part#1062 Kit with Light
Mount caps & Plate