Rough Country 1106 User Manual
Page 3
11. Install the upper control arms in the relocation brackets with the supplied 12mm x 90mm bolts, washers /nuts. See
Photo 7.
12. Install the lower control arms in the relocation bracket using the factory hardware. See Photo 8.
13. Reinstall the tires and wheels.
14. Jack up the vehicle and remove the jack stands.
15. Lower the vehicle to the ground.
16. Tighten all hardware at this time.
17. Tighten the upper arm hardware using a 19mm socket / wrench.
18. Tighten the lower arm hardware using a 22mm socket / wrench.
Photo 7
Photo 8
INSTALL THE UPPER ARM
INSTALL THE LOWER ARM
See also other documents in the category Rough Country For the car:
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)