Rough Country 1106 User Manual
Jeep jk front arm relocation kit
JEEP JK FRONT ARM RELOCATION KIT
Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician install this kit. In addition to these instructions, professional knowl-
edge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install this
product without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have all
needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
PRODUCT USE INFORMATION
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered. If question exist we will be happy to answer any questions concerning the de-
sign, function, and correct use of our products by calling 1-800-222-7023.
IMPORTANT NOTE : Upon completing the install of this kit the draglink must be adjusted to center the
steering wheel BEFORE the vehicle is driven. Failure to do so will cause a computer error, odd han-
dling, and poor performance.
NOTICE TO DEALER AND VEHICLE OWNER
Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of
the windshield or on the vehicle’s dash. The decal should act as a constant reminder for whoever is operating the vehi-
cle of its unique handling characteristics.
INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on
to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.
92110600
Tools Needed:
Jack Stands
Floor Jack
Reciprocating Saw
18mm Socket / Wrench
19mm Socket / Wrench
21mm Socket / Wrench
22mm Socket / Wrench