Rough Country 734.20 User Manual
Page 3
11. Loosen and remove lower control arms using a 22mm & 24mm wrench as shown in PHOTO 7 & 8. Retain the hard-
ware for reuse. Remove the lower control arms from the vehicle.
PHOTO 7
PHOTO 8
12. On the front cross-member, remove the 4 bolts securing the cross-member to the frame using a 17mm wrench as
shown in PHOTO 9. Retain hardware for reuse.
13. Remove the differential bolt as shown in PHOTO 10 using a 15mm wrench. Retain hardware for reuse. Remove the
factory cross-member and retain for reuse.
PHOTO 9
PHOTO 10
14. Remove driveshaft from the differential as shown in PHOTO 11 using a 13mm wrench. Retain hardware for reuse.
Secure driveshaft out of harms way.
PHOTO 12
15. Remove the two factory bump-stops from the frame using a 14mm wrench as shown in PHOTO 12 & 13.
16. Support the differential with a floor jack and remove the hardware on the drivers side as shown in PHOTO 14 using
a 17mm wrench.
PHOTO 13
PHOTO 14
PHOTO 11
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)