Rough Country 562P - Manual (Page 4)

ALSO AVAILIBLE FROM ROUGH COUNTRY
87491 DUAL STEERING STABILIZER
Front Shock Absorbers
Rear Shock Absorbers
Front Track Bar Bracket
Front Coil Springs
Rear 2” Lift Blocks & U-bolts
POST INSTALLATION INSTRUCTIONS
1. Check all fasteners for proper torque. Check to ensure there is adequate clearance between all rotating, mobile,
fixed and heated members. Check steering gear for interference and proper working order. Test brake system
2. Perform steering sweep. Check to ensure brake hoses have sufficient slack and will not contact rotating, mobile, or
fixed members, adjust lines/brackets to eliminate interference and maintain proper working order. Failure to perform
inspections may result in component failure
3. Readjust headlights to factory settings
4. Have vehicle aligned by a certified alignment professional.
5. Re-torque all nuts, bolts, and especially u-bolts after the first 100 miles, again after another 100 miles and then check
periodically thereafter
6. All components must be retightened after 500 miles, and every three thousand miles after installation
Thank you for choosing Rough Country for your suspension needs.
Front Radius Arm Brackets
Kit Contents