Rough Country 1080 - Manual

07-13 GM 1500 WINCH PLATE
THANK YOU FOR CHOOSING ROUGH COUNTRY FOR YOUR OFF ROAD NEEDS.
Rough Country recommends a certified technician install this kit. In addition to these instructions, professional knowl-
edge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install this
kit without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have
all needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
*Note* there are different steps for GMC and Chevrolet trucks in this instruction sheet.
PRODUCT USE INFORMATION
Install winch with instructions supplied with winch. Always practice safe winching and recovery. Never overload a winch
or use the winch which in any way would void your manufactures warranty.
92108000
10mm wrench /socket
18mm wrench /socket
21mm wrench
3/16” Allen Wrench
3/4” Wrench
Needle Nose Pliers
Flat Screw Driver
Reciprocating Saw
Or
Body Saw
Tools Needed:
1080 Box Contains:
Winch Plate
Driver Winch Plate Bracket
Passenger Winch Plate Bracket
License Plate Bracket
Disengage Extension
1080 Poly Bag:
8-1/2” x 1.5” Bolts
16-1/2” Flat Washers
8-1/2” Lock Nuts
1/4” x 3/4” Socket Head Cap
Screw
Kit Contents: