Rough Country 51180-15 - Manual (Page 7)

Fabric Replacement Top – Installation Instructions
Rev. D 0606 51127 / 51180 pg. 7
Insert the Tailgate Bar into the mounts on each side
of the tailgate opening with the vinyl side of the Rear
Window toward the outside of the vehicle.
Place Tailgate
Bar in mounts
Install Tailgate Bar on Vehicle
To start the zipper, pull the two sliders as far
down as possible on the driver’s side of the
window in order to catch the sliders to the pin.
Once the zipper is caught, start the top slider
1/2". Then hold up the top of the window with
one hand and close the zipper with the other.
The zipper is sandwiched between layers of
fabric in the corners so be careful not to catch
extra fabric in the zipper. Close the zipper.
Make sure that the Tailgate Bar is centered and
is securely in the mounts. Then tuck the fl aps
on the Rear Window under the top fabric.
Tuck Flaps
under top
Pull both sliders down as far
as possible to catch pin
Start
Zipper
Secure Rear Window Zippers
Inside the top locate the fl aps sewn to the top on
each side of the rear window opening. Pull the fl aps
over to cover the zipper and tuck them in.
View from inside top
Rear Window
Pull fl ap
over to cover
zipper and
tuck in
Secure Rear Window Flaps