Rough Country 51180-15 - Manual (Page 3)

Fabric Replacement Top – Installation Instructions
Rev. D 0606 51127 / 51180 pg. 3
Unfasten the fl ap around the Center Bow.
View from inside vehicle
Sport Bar
Unfasten hook
and loop to
unwrap fl ap
Center Bow
Unfasten Center Bow
Collapse the bow assembly down onto the tailgate.
With the bow assembly laying on the tailgate,
remove the screws that fasten the fabric to the
corners of the header. Set the screws aside for
use in installing the new top fabric.
Detail of Header
Collapse bows and
fabric onto tailgate
Header
Remove Screw
Remove Corner Screws
Flip the top fabric back over into the rear of the
vehicle (so that the fabric lays backing side up) to
expose the plastic strip along the edge of the fabric.
Remove the eight or fourteen screws that secure
the fabric to the header. Set the screws aside for
use in installing the new top. Then remove the old
top fabric from the vehicle.
Flip the fabric into the
rear of the vehicle
Remove the 8 or 14 screws that
secure the fabric to the header
Due to a recent header assembly modi-
fi cation by Daimler Chrysler, the plastic
strip on the windshield header may have 8 screw
locations instead of 14. Both attachment numbers
of screws will securely fasten the header and per-
form as the original design was intended.
Remove Screws Holding
Fabric to Header