Rough Country 563.20 - Manual (Page 7)

Don’t forget your RCX Dual Stabilizer Kit !
Available from Rough Country
10. Locate shock part number 658601 gas shock and assemble poly bushings and sleeve in shock. Using a 18mm
wrench, for the upper, and a 19mm and 15mm wrench for the lower. Install using factory hardware on upper and
lower shock mount
11. Install the tires and wheels.
12. Jack up the rear of the vehicle and remove the jack stands. Lower the vehicle to the floor.
13. With the weight of the vehicle on the axle, torque the u-bolts to 130-150 ft-lbs
.
14. Check all hardware for proper torque .