Toner Cable D9854 Advanced Program Receiver - Manual

The Cisco ® D9854 Advanced Program Receiver is designed for satellite content distribution applications requiring DVB-S and
DVB-S2 reception capabilities with advanced digital outputs for digital tier program distribution. A built-in decoder is capable
of decoding an MPEG-2 or MPEG-4 AVC High Definition (HD) program from analog monitoring, or Standard Definition (SD)
down-conversion for composite. Decoding of an MPEG-2 or MPEG-4 AVC SD program is also available for analog and SDI
output. A high-quality SDI or HD-SDI output version of the D9854 is available for re-encode applications.
Digital Program Distribution
The ASI transport output or the optional MPEGoIP output provides a number of output modes, including the capability of car-
rying decrypted program for digital tier distribution. This helps ensure that compressed video programs are efficiently distrib-
uted to households equipped with digital set-top boxes.
Digital Program Mapping
Digital Program Mapping allows programmers to transparently substitute programs at the uplink. It maintains predictable and
compliant transport output during service replacement, Network Information Table (NIT) retune, and channel changes, includ-
ing force tunes. This feature remaps the packet identifier (PID) information from the primary service to an alternate service,
allowing downstream devices to continue to operate without headend operator intervention. This helps ensure availability of
alternate programming in the digital tier.
Digital Ad Insertion
Digital Program Insertion (DPI) information is available along with the video and audio PIDs for external ad insertion in com-
pressed digital format.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
KEY FEATURES
• Four L-band inputs
• DVB-S QPSK demodulation
• DVB-S2 QPSK/8PSK demodulation
• PowerVu
® conditional access with DES or DVB
descrambling
• Supports Basic Interoperable Scrambling System
(BISS) conditional access
• DVB-CI support for CAM-based conditional access
• 4:2:0 HD MPEG-4 AVC and MPEG-2 1080i and 720p
decoding
• 4:2:0 SD MPEG-4 AVC and MPEG-2 decoding
• Aspect ratio conversion (4:3, 16:9, 14:9) with Active
Format Descriptor (AFD) control for SD programs
• AFD support for down-conversion of HD programs with
aspect ratio conversion
• Closed Captioning support for EIA-608 and EIA-708
• MPEG and Dolby
® Digital audio decoding
• DVB or Imitext subtitling
• Four audio outputs providing either two stereo pairs or
four mono channels of balanced audio, each with the
ability to use part of their output for applications such
as SAP, cue tones, etc.
• Utility data up to 38.4 kbps via RS-232
• Uplink addressable decoder output control (VBI, audio
routing, DPI, and ASI output)
• Fingerprint trigger
• Field upgradeable software and security
• SNMP for setup, control, and monitoring
• Front panel LCD for control and monitoring
• Web browser interface for easy setup, control, and
monitoring
• DVB-VBI and SCTE-127 support
• CAM Interface software
• DTMF cue tone and cue trigger outputs for ad insertion
• Digital Program Mapping providing uplink control for
service replacements in blackout areas
OPTIONAL FEATURES
• MPEGoIP output only available on the digital transport
model
• User-switchable redundant ASI, SDI, or HD-SDI out-
puts
• SDI or HD-SDI video output with embedded audio
• AES-3id digital audio output
D9854
Advanced Program Receiver