Toner Cable NV*-1-3G JPEG 2000 Encoder _ Decoder - Manual

NVE-1-3G & NVD-1-3G
JPEG 2000 Encoder / Decoder
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Features
„ Video and audio transmission over IP
„ JPEG 2000 compression / expansion
„ Supports all video standards up to 1080p/60Hz
„ Accepts embedded audio via 3G HD-SDI
„ Video Signals: 3G HD-SDI, HD-SDI and SDI
„ 1 Gbps Ethernet Interface
„ USB HID for keyboard and mouse control
„ USB programming and control interface
Applications
„ Broadcast Contribution Applications
„ Broadcaster to Head-end links
„ OB Van Contribution links
EMCORE’s NVE-1-3G and NVD-1-3G are professional grade encoder/decoders
that simplify the transmission of 3G HD, HD-SDI and SDI with embedded audio
over IP. Utilizing JPEG 2000 compression technology, they can transmit high
quality video with embedded audio over an IP network with extremely low
latency.
The NVE/NVD-1-3G are perfect for distributing High Definition video over IP for
a variety of Broadcast contribution applications where the highest quality video
and low latency (<50 ms) are required. The built-in switching functionality of
the NV encoders and decoders, in conjunction with the IP network, eliminates
the need for video matrix switches. High quality HD video from any source can
be connected to any display at any time over an IP network.
The NVE-1-3G encoder accepts an HD video signal, slightly compresses the
signal and transmits via an IP network. The NVD-1-3G decoder receives the IP
stream, decompresses it and outputs the original HD signal for distribution and
display.
JPEG 2000 compression allows considerable reduction of the data rate in the
network without visible loss of quality. Minimal delay means that the modules
are also suitable for use in any mission critical application requiring real-time
video and audio over IP. The NV-1-3G encoder and decoder support video
input signals with embedded audio.
IP networks may be localized or extended to cover several regions by means of
optional WAN technology.
Encoders and decoders are supplied as stand-alone modules. They can be
mounted in a 19” 1RU rack enclosure by twos, or singularly in a desktop
enclosure. The devices can be configured via a web server, CLI interface or over
Telnet. A simple software interface allows direct activation of the devices by
any control software.
High-Definition JPEG 2000 over IP