Toner Cable 2807 Mini-Node Fiber Optic Receiver - Manual (Page 2)

Telephone: Nationwide: Fax: E-mail: Internet:
215-675-2053 800-523-5947 215-675-7543 [email protected] http://www.tonercable.com
©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Emcor
e 2807 & 2808 Fiber Optic R
eceiv
er
s
Model 2808 Specifications Model 2807 Specifications
Optical Characteristics*
Bandwidth
40 to 860 MHz
Operating Wavelength 1310 / 1550 nm
RF Output Level +28 dBmV
Output Return Loss 16 dB
Required Fiber Bandwidth 2000 MHz
Output Impedance 75 Ohms
Backreflection Tolerance -50 dB
Composite Second Order (CSO) -63 dBc
Composite Triple Beat (CTB) -66 dBc
Carrier-to-Noise Ratio (CNR) 54.5 dB
Electrical and Environmental Characteristics*
Power Supply Voltage
120 / 240 VAC
Power Supply Frequency 50 / 60 Hz
Power Dissipation 8 Watts
Operating Temp Range 0 to +50°
Storage Temp Range -20 to +70°
Humidity (RH, non-condensing) 5 to 95 %
Physical Characteristics*
Weight
1.1 lbs, 0.5 kg
Dimensions 8.45 x 2.95 x 1.12 in
215 x 75 x 29 mm
*System performance specifications indicated for use with
9/125 μm single-mode fiber. The receiver Model 2808 works
Optical Characteristics*
CATV Receiver
Operating Wavelength
1310 / 1550 nm
Optical Input Power -8.0 to +4.5 dBm
Channel Loading 110 Ch
Bandwidth 50-860 MHz
RF Output Level +38 dBmV
Output Return Loss 16 dB
Required Fiber Bandwidth 2000 MHz
Output Impedance 75 Ohms
Backreflection Tolerance -50 dB
Composite Second Order (CSO) -63 dBc
Composite Triple Beat (CTB) -66 dBc
Carrier-to-Noise Ratio (CNR) 54.5 dB
Return Path Modules
Operating Wavelength
1310 / 1550 nm
Optical Output (FP Laser) 1.5 mW
Optical Output (DFB Laser) 3.0 mW
Bandwidth 5 to 42 MHz
Electrical and Environmental Characteristics*
Power Supply Voltage
+10 / +12 / +15 VDC
Power Dissipation 10 Watts
Operating Temp Range 0 to +50°
Storage Temp Range -20 to +70°
Humidity (RH, non-condensing) 5 to 95 %
Physical Characteristics*
Weight
10 oz, 283.5 g
Dimensions 8.45 x 2.95 x 1.75 in
215 x 75 x 45 mm
*System performance specifications indicated for use with 9/125
μm single-mode fiber. Force recommends the Model PS200 +15
Volts DC, 950 mA power supply for use with this product. The
receiver Model 2807 works with transmitter Models 2804 and 2805.
RX & Return Path Mini-Node RX, SM Return Path Module,
Module Options 1310/1550 nm, SC/APC SM, SC/APC
No Return Path 2807NA-SFSP --
1.5 mW FP Laser, 1310 nm 2807NB-SFSP 2807PB-SCNN
3.0 mW DFB Laser, 1310 nm 2807NC-SFSP 2807PC-SDNN
3.0 mW DFB Laser, 1550 nm 2807ND-SFSP 2807PD-SDNN
3.0 mW DFB Laser, CWDM 2807NE-SFSP 2807PE-SDNN
RX Options Rx, 77/110 Ch, 1310/1550 nm
Module Options
SC/APC Connectors
2808R-SFSP
FC/APC Connectors 2808R-SFAP
Model 2807 SM 77/110 Channel Rx P/N* Model 2808 SM 77/110 Channel Rx P/N*