Toner Cable DNP100 Network Media Player - Manual (Page 2)

Specifications Subject To Change Without Notice Rev 02-13 ©Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
Video Output
Component: 480p, 720p, 1080i
HDMI: 480p, 720p, 1080i
Composite: 480i
Output: VGA & HDMI
Audio Output
L/R Stereo: R/L RCA
Digital Optical Toslink
Control I/O
Optional push-button dual controls
Custom program can allow up to 8 inputs
RS-232 Commercial Monitor Control
IR Extender (on front panel)
Network Connection
LAN: 10/100/1000 Base-T
WiFi: 802.11 b/g (optional)
Video Format Support
MPEG2: MP@HL (35 Mbps max HD)
MPEG4: Part 2 (20 Mbps max HD)
Part 10 H.264 (15 Mbps max HD)
Composite: 480i
WM9/VC-1: 20 Mbps max
Graphics Format
JPEG: On media layer, (recommended resolution is 1920x1080)
Browser Support: HTML,BMP, TIFF, GIF, Javascript
Bandwidth
Broadband: DSL,Cable,T1 with at least 128 Kbps
TCP/IP Address
LAN: Any fixed IP address for each player
WAN: Fixed public IP address for each player or router with its port
forwarding enabled if players are behind a router.
Required Ports for SNMP API
Player port is fixed at 161
Source port 161, Player IP, Destination Port 161
Network Protocol Support
Internet: IP, TCP, UDP, ICMP, ARP,DHCP, HTTP, FTP, IGMP RTP, SNMP
Power
Input Voltage: 100-240 VAC
Power Dissipation: 7 Watts
Environment
Operating Temperatue: 0 to 40° C
Operating Humidity: 80% max, relative humidity, non-condensing
Specifications
DNP100
Network Media Player