Toner Cable TSMS2150X Series Rack-Mounted Multiswitches User Manual
Tsms2150x series, Tsms2150x series rack-mounted multiswitches

Telephone:
Nationwide:
Fax:
E-mail:
Internet:
01/04
Pico Macom TSMS2150X Series Multis
witc
h
215-675-2053
800-523-5947
215-675-7543
http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
TSMS2150X Series Rack-Mounted Multiswitches
TSMS2150X Series
Rack-Mounted Satellite Multiswitches
Pico Macom’s TSMS-2150X Series rack-mounted satellite
multiswitches can be used in every SMATV application requir-
ing satellite 950-2150 MHz IF distribution. The easy mount
enclosure and all rear panel connections provide for rack
mounting or quick and easy wall mounting by simply turning
the unit face to the wall. The TSMS-2150X-8AUV allows 2
LNB inputs and 1 off-air antenna input (40-806 MHz) and pro-
vides 8 outputs, while the TSMS-2150X-16A allows 2 LNB
inputs and provides 16 outputs. The advanced circuit design
incorporates a pin diode matrix to route any of the inputs to
any of the outputs by utilizing the 13-14V Right-
Circular/Vertical or 17-18V Left-Circular/Horizontal switching
control supplied by the satellite receivers, thus eliminating digi-
tal artifacts that result from mechanical relay switching. To
compensate for insertion loss, both versions use separate
built-in amplifiers for satellite and/or VHF/UHF signals. The
TSMS-2150X series, used with the external power supply, will
supply power to the LNBs reducing heat build up within the
multiswitch and prolong the life of the unit.
! Wide frequency range
(TSMS2150-16A 950-2150 MHz;
TSMS2150-8AUV 40-2150 MHz)
! Simple interface design provides 2
satellite polarity inputs and 8 or 16
outputs, for quick installation
! All rear panel connection access
allows rack or wall mount flexibility
! PIN diode matrix reduces polarity
transfer time and digital artifacts
providing consistent picture quality
! Polarity is selected by receiver
supplied voltage (14V/18VDC)
compatible with most DTH satellite
services
! Antenna signal combines with
satellite on output eliminating
external combining, reducing cost
and clutter
! 500 mA voltage power pass-
through reduces cost by providing
satellite receiver path for LNB
power
! Built-in amplifier compensates for
insertion losses reducing need of
external amplification
! External UL Approved power sup-
ply reduces heat buildup thus
increasing unit life
TSMS2150X Series
Rack-Mounted Satellite Multiswitches