Toner Cable QMOD-HDMI 1.5 HDTV Modulator - Manual (Page 2)

Specifications Subject To Change Without Notice Rev 0 6-13 © Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
QMOD-HDMI 1.5 HDTV Modulator
Specifications
Feature
Physical 8.5” [216mm] wide x 1.73” [62mm] height (1RU) x 6.0” [153mm] deep
1.5 lbs [0.68kg]
+32° to 122° F operating temperature, fan cooled
Rack mounting for one or two units side-by-side optional (RK1, RK2EZ)
Encoding MPEG2 Profile:MP@HL for HD, MP@ML for SD
Auto-syncs to1080i, 720p, 480p, and 480i resolution, depending on input
Compensates for 60/30 Hz Component sources
Video Encoding bitrate 11, 13, 15, 18 or 25 Mbps (18 or less for dual-channel)
AC-3 (Pass-through or stereo) or MPEG1, Layer 2 audio
MTS Dual-language capability
Optional scaling accepts VGA resolutions, overscan compensation, and positioning
Optional dual-channel operation carries 2 full HD channels
Modulation Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1)
MER 38 dB typical
Compliance FCC Class B, ROHS, meets California standards
Front Panel Select and directional buttons for menu setup
Menu LCD, 2 lines of 20 white characters each
Back Panel
Power
EAS
2.1mm coaxial jack (inside center conductor positive)
1.1A maximum, 11.5 to 13.5 VDC, 12 VDC typical
Captive-screw terminal with 3 GPI Pins for momentary or latching control
Ethernet RJ-45 GigE Ethernet: Web page, control, streaming video
Video Inputs HDMI (non-HDCP), up to 1080p
HD15 RGBHV/Component input up to 1080p, 59.94/60, 29.97/30 Hz
Composite Video: RCA female (480i), 29.97 Hz, also used for Line 21 captioning data
Audio Inputs Two Digital SPDIF Coax RCA, PCM/AC-3 48K sample rate
Two 3.5mm stereo analog inputs
Inputs assignable to video inputs
RF ‘F’, female, 75 ohm impedance
Agile, channels 2-135 (48-860 MHz), standard, HRC, or IRC spacing
6 MHz bandwidth fits any open channel without interference to adjacent channels
1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability
29 dB typical output power, attenuated in 5 steps, approx 4 dB
Includes Compact PS12-1.5 switching power supply, 1.5A 12 VDC, fits power strip
Free option to include PS12-4Y power supply with every 2-3 modulators when ordered
HD15 to RCA Component adapter cable
Options RK1 Single Rack Kit
RK2EZ Dual Rack Kit