Xerox DocuPrint M750 User Manual
Page 34
Q u i c k R e f e r e n c e G u i d e
4.8
P R I N T Q U A L I T Y P R O B L E M S
Print Quality Problems
Symptom
DiagnosDia
Diagnosis and/or Solution
gnosis and ors
When making multiple
prints from the bypass tray,
prints have fine white lines
•
Try changing the paper source from bypass to Tray 1. You can
still feed paper through the bypass tray. The system
automatically feeds from the bypass tray when paper is inserted
into the by-pass slot.
Transparency print quality
is poor
•
Make sure you have selected Transparency from the paper/
output property page.
•
Check to make sure you are printing on the rough side of the
transparency.
•
Make sure you are using ink jet transparencies.
Solid black areas on my
prints are light and do not
stand out
•
The black density is dependent on the paper you are using as
well as the print mode you have selected. If you are not
satisfied with the black density of your print, choose a higher
quality print mode or pick a different paper to improve the
density.
00-SFXM750.book Page 8 Friday, August 18, 2000 1:30 PM