Xerox DocuPrint M750 - Manual (Page 30)

Q u i c k R e f e r e n c e G u i d e
4.4
P A P E R F E E D I N G P R O B L E M S
Paper Feeding Problems
Symptom
DiagnosDia
Diagnosis and/or Solution
gnosis and ors
Paper sticks together • Make sure there isn't too much paper in the tray. Depending on
the thickness of your paper, the paper tray can hold up to 150
sheets of paper.
• Make sure you are using the correct type of paper. Remove
paper from the feeder and flex or fan the paper.
• Humid conditions may cause some paper to stick together.
More than one sheet of
paper being fed • There may be different types of paper in the tray. Load paper of
only one type, size, and weight.
Paper skews or buckles • Make sure there isn’t too much paper in the tray. Depending on
the thickness of your paper, the feeder can hold up to 150 sheets
of paper.
• Try another type of paper. Make sure the paper is not bowed in
the tray.
• Make sure the paper guides are adjusted snugly against the
paper.
Transparencies stick
together in the paper exit • Use only transparencies specially designed for an ink jet
printer.
• Remove each transparency as it leaves the printer.
Envelopes skew or fail to
feed correctly • Make sure that the paper guide is against the left side of the
envelopes.
Problem feeding glossy
paper • There are many different glossy papers available on the market
which range in thickness. Xerox recommends using Kodak
glossy paper with the M750 and M760 printers for optimum
feed performance.
00-SFXM750.book Page 4 Friday, August 18, 2000 1:30 PM