Velleman WS2800 Software User’s Guide - Manual (Page 15)

P a g e | 15
IF SYNCHRONIZATION IS NOT SUCCESSFUL
If the synchronization process is not successful; you will see a message
similar to the one to the right. At this point, you will need to retry the
synchronization.
REPEATING THE SYNCHRONIZATION PROCESS
To repeat the synchronization process, we need to put both the
weather station and the software into synch mode again. To do this press the down arrow on the display, then
click the Synchronize button on the ‘Synchronize message box (on the software).
Please refer to the preceding sections for details on the synchronization process.
OPERATION
This section covers the operation of your Heavy Weather Pro software application.
Note: In this document, we will not address the operation of your weather station, except where it
pertains to the Heavy Weather software application. For more information regarding the operation of
your LaCrosse Technology weather station, please refer to the documentation provided for your specific
model.
MAIN WINDOW
The main window of Heavy Weather Pro is where you can review all of the weather attributes reported from your
weather station.
The left side of the main window is referred to as the File Management window. We talk more about this in the
section on Charts and Graphs since that is where it is mainly used.
The right side of the main window is a tabbed dialog, which means it can display several windows at once, with
each window distinguished by a tab at the top. When we are looking at Current Weather, this window will show all
of the weather properties collected from the internal and external sensors. This section will talk about those
properties in detail.