Trek 2220 Piezo Driver-Power Amplifier - Manual

Trek’s Model 2220 is one of several models within our 2200-
series of high-voltage 40 W amplifiers. Provided at an
attractive price and offering high performance, the unit
incorporates
DC stability, wide bandwidth and well
regulated/controlled AC output signals. It also features full
four-quadrant class AB all-solid-state output stages, DC
offset adjustment with front panel metering, and auto-
recovery shutdown to protect the output from being
overpowered. The instrument stage sinks or sources current
into reactive or resistive loads throughout the output voltage
range making it ideal to achieve the accurate output
response and high slew rates demanded by reactive loads.
Trek Model 2220
Piezo Driver/Power Amplifier
Typical Applications Include
! Piezoelectric driving/control
Electro-optic
MEMS
Many areas of research
!
!
!
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804
Features and Benefits
!
!
!
!
!
! Four-quadrant output for driving capacitive loads
2-year warranty
DC offset adjustment with front panel metering
Auto-recovery shutdown protects the output from being overpowered
Low output noise for ultra-accurate outputs
All solid-state output stages
! RoHS compliant
! HALT Tested
! compliant
! NIST-traceable Certificate of Calibration provided with each unit
Key Specifications
!
!
!
!
!
!
Output Voltage Range:
Output Current Range:
peak AC for 5 ms minimum
Slew Rate: 100 V/
0 to ±2 kV DC or peak AC
0 to ±10 mA DC or ±20 mA
µs, typical
Large Signal Bandwidth (-3 dB): DC to greater than 7.5 kHz (minimum trip off frequency)
Small Signal Bandwidth(-3 dB): DC to greater than 50 kHz
DC Voltage Gain: 200 V/V