Trek 2100HF High-Voltage Power Amplifier - Manual

The Trek Model 2100 HF is a high-frequency, high-speed, wide
bandwidth amplifier for high power applications. It incorporates
an
all-solid-state design for highly reliable low-noise operation, thus
achieving accurate output response and high slew rates, even in
highly capacitive loads. Full power frequency response of the
amplifier is essentially flat up to 2 MHz. No overshoot or instability
of the waveform occurs due to the amplifier’s unique dual
feedback feature.
Trek Model 2100HF
High-Frequency, High-Speed Amplifier
Typical Applications Include
! Dielectric material characterization
Electro-optic modulation
Ion beam control
MEMS
Piezoelectric driving and control
Ultrasonics
!
!
!
!
!
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804
Features and Benefits
!
!
!
!
!
!
Incorporates all-solid state design for highly reliable low-
noise operation
Achieves accurate output rates and high slew rates even in
highly capacitive loads
Full power frequency response is essentially flat up to 2 MHz
Dual feed-back feature ensures “no overshoot” or instability
of waveform
RoHS compliant
NIST-traceable Certificate of Compliance provided with
each unit shipped
! compliant
Key Specifications
!
!
!
!
!
!
Output Voltage Range:
Output Current Range:
Slew Rate:
2 kV/
0 to ±150 V DC or peak AC
0 to ±300 mA DC
µs, typical
Large Signal Bandwidth (-3 dB): DC to greater than 2.6 MHz
Small Signal Bandwidth(-3 dB): DC to greater than 3 MHz
DC Voltage Gain: 50 V/V