Trek 2205 Piezo Driver-Power Amplifier - Manual

The Trek Model 2205 is a member of Trek’s 2200-series of
high-voltage 40 W amplifiers that offers high performance at
an attractive price. It incorporates
DC stability, wide
bandwidth, well regulated and controlled AC output signals,
full four-quadrant class AB all-solid-state output stages, DC
offset adjustment with front panel metering, and auto-
recovery shutdown to protect the output from being
overpowered. The instrument also stage sinks or sources
current into reactive or resistive loads throughout the output
voltage range which makes it ideal to achieve the accurate
output response and high slew rates demanded by reactive
loads.
Trek Model 2205
Piezo Driver/Power Amplifier
Typical Applications Include
! Piezoelectric driving/control
Electro-optic
MEMS
Many areas of research
!
!
!
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804
Features and Benefits
!
!
!
!
!
! Four-quadrant output for driving capacitive loads
2-year warranty
DC offset adjustment with front panel metering
Auto-recovery shutdown protects the output from being overpowered
Low output noise for ultra-accurate outputs
All solid-state output stages
! RoHS compliant
! HALT Tested
! compliant
! NIST-traceable Certificate of Calibration provided with each unit
Key Specifications
!
!
!
!
!
!
Output Voltage Range:
Output Current Range:
peak AC for 5 ms minimum
Slew Rate: 150 V/
0 to ±500 V DC or peak AC
0 to ±40 mA DC or ±80 mA
µs, typical
Large Signal Bandwidth (-3 dB): DC to greater than 75 kHz
Small Signal Bandwidth(-3 dB): DC to greater than 100 kHz
DC Voltage Gain: 50 V/V
Model 2205
Frequency (Hz)
kV p-p