Trek 601C High-Voltage Power Amplifier - Manual

The Model 601C is a DC-stable, high-voltage power
amplifier designed to provide precise control of output
voltages. It features up to two independent amplifier
channels in one enclosure and an all solid-state
design for high slew rate, wide bandwidth and low-
noise operation. The four-quadrant, active output
design of the Model 601C sinks or sources current into
reactive or resistive loads. These features are
essential for achieving the accurate output response
and high slew rates demanded by reactive loads.
Trek Model 601C
High-Voltage Power Amplifier
Key Specifications
! Output Voltage Range:
! Output Current Range:
! Slew Rate: Greater than 50 V/
!
!
0 to ±500 V, 0 to -1 kV, or 0 to +1 kV DC or peak AC
0 to ±10 mA DC or 0 to ±20 mA peak AC
µs
Large Signal Bandwidth (1% distortion): DC to 8 kHz
DC Voltage Gain: 100 V/V (a gain of 50 V/V is available for the ±500 V range only)
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR TREK
716-438-7555 • 716-201-1804 (fax) • www.trekinc.com • [email protected]
Features and Benefits
!
!
!
!
!
!
!
DC accuracy is better than 0.1% of full scale
Precision
Remote high-voltage ON-OFF
voltage and current monitors provide low-voltage representations of the high-voltage output and load
current for monitoring purposes or for use as feedback signals in a closed-loop system
NIST-traceable Certificate of Calibration provided with each unit
Operation as a noninverting or inverting amplifier with a fixed gain
Different output voltage ranges, input configurations and voltage gain ratios are available; please contact Trek, Inc.
for more information
compliant
Typical Applications Include
! Driving piezoelectric actuators
! Modulating electrooptics
! Electrostatically controlling ion beams
! Providing remote ON/OFF capabilities for automated
or computer controlled systems