Trek 610E High-Voltage Power Amplifier - Manual

The Trek Model 610E is a high-voltage supply/amplifier/controller
which provides six modes of high-voltage operation. As a high-
voltage amplifier, the Model 610E amplifies an externally applied
signal with a switch-selectable setting of 100 V/V or 1000 V/V. As a
high-voltage reference supply, a front panel dial commands the
output voltage. As a transconductance amplifier, an externally
applied voltage signal produces a proportional output current. As a
current supply, a front-panel dial commands the output currents. As
a high-voltage controller, the high-voltage amplifier mode is
maintained but the amplifier input and feedback elements are
uncommitted and available for configuration by the user.
Trek Model 610E
High-Voltage Supply / Amplifier / Controller
Key Specifications
! Output Voltage Range:
! Output Current Range: peak AC
! Slew Rate: Greater than 20 V/
!
!
!
!
0 to ±1 kV or 0 to ±10 kV
0 to ±200 µA or 0 to ±2000 µA
µs
Large Signal Bandwidth (-3 dB): DC to greater than 1.2 kHz
Voltage Gain (1 kV range): 100 V/V
Voltage Gain (10 kV range): 1000 V/V
Transconductance Gain: 200 µA range is 20 µA/V; 2000 µA range is 200 µA/V
Typical Applications Include
!
Closed-loop charge control
! Electrophotographic research
! Insulation testing
! Dielectric material evaluation
!
AC or DC calibrators and supplies
TREK, INC. • 190 Walnut Street • Lockport, NY 14094 • USA • 800-FOR-TREK
(fax) • www.trekinc.com • [email protected] 716-438-7555 • 716-201-1804
Features and Benefits
!
!
!
!
!
!
!
!
Multi-mode operation for enhanced utility
Four-quadrant output for driving capacitive loads
Closed loop system for high accuracy
Short-circuit protected for equipment protection
DC-stable for programmable supply applications
Low output noise for ultra-accurate outputs
NIST-traceable Certificate of Calibration provided with each unit
compliant