RIEDEL Juggler - Manual (Page 2)

RIEDEL JUGGLER
Integrated TETRA Radio System for Artist Intercoms
Specifications:
JUGGLER
Artist Interface
TETRA
Base Station
Controller
TETRA
Base Station
Frequency Bands (other frequencies on request)
Russia
RX=300-310MHz, TX=336-346MHz,
BW=10MHz
China RX=350-360MHz, TX=360-370MHz,
BW=5MHz
Public Safety RX=380-390MHz, TX=390-400MHz,
BW=5MHz
Civil RX=410-420MHz, TX=420-430MHz,
BW=5MHz
450 MHz RX=450-460MHz, TX=460-470MHz,
BW=5MHz
FCC RX=805-825MHz, TX=850-870MHz,
BW=14MHz
Transmitter and Receiver:
TX power at antenna connector
0.5W to 10W TETRA remotely
adjustable
RX sensitivity -121dBm with diversity
-118dBm without diversity
Receiver diversity Dual as standard
Build-in duplexer combines TX and one RX antenna
Time and frequency sync Internal or external GPS
TX power measurement forward and reflected
RX sensitivity BER measurement built-in RFTL, -122 to -104dBm
Interfacing
Interfacing to Artist
MADI (Coax or Optical)
Interfacing to JUGGLER Artist Interface RJ45 (Ethernet)
Interfacing to TETRA Base Station Controller RJ45 (Ethernet)
Antenna Connections
Minimum antenna setup
One antenna (no diversity)
Normal antenna setup Two antennas (dual diversity)
Antenna setup for two Base Stations Two antennas (dual diversity)
GPS antenna Active (+5V DC) or passive
General
Power requirements
85 – 265 V AC / 47 – 63 Hz 100 – 240 V AC / 47 – 63 Hz 48 V DC
(provided by base station controller)
Power consumption 120 VA 20 VA 75 W @ 10W TETRA (typical)
H x W x D 88 x 483 x 230 mm
(2 RU x 19" x 9")
375 x 283 x 215
(incl. mounting bracket)
333 x 246 x 165 mm
(incl. mounting bracket)
Mass (incl. mounting accessories) 2.4 kg 20 kg 9 kg
Operating temperature -20 0 to +55 0 Celsius -20 0 to +55 0 Celsius -25 0 to +55 0 Celsius
Encapsulation Standard 19"-rack-mount IP65 IP65
Riedel Communications GmbH & Co. KG | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90 | Fax: +49 (0) 202 292 - 99 99 | www.riedel.net