RIEDEL Partial-Files - Manual

Partial Files
Product specifications are subject to change without notice. This material is provided for information purposes only; Riedel assumes no liability
related to its use. September 2004.
In many installations different setups for various types
of regular productions are stored on a PC. These
setups usually only modify parts of the total system
configuration while the rest is to be kept unchanged.
Since the online configuration needs regular adminis-
tration and i.e. is being auto-tracked to an audio/video
routing switcher, it is being modified regularly, from
once a while to several hundred times each day.
If you´d transfer one of your typical setups from PC to
the online system in such a situation, you´d overwrite
all these changes.
Unlike complete configuration files partial files only
contain certain aspects of the configuration which are
to be added to the online configuration when the partial
file is transferred to the system.
Partial files in Artist are supported down to a command
level, i.e. one can add a single command to a specific
key of a panel without changing anything else.
You can build up a control-room/studio assignment tool
using partial files.
Alternatively you can assign certain types of produc-
tion-setups to specific production facilities. It is an
effective and powerful tool.
Director Software Screenshot
Loading of partial files for non-technical operators is
very simple.
By selecting and deselecting crosspoints on the partial
file X/Y matrix the operator uploads the appropriate
combination of partial files.
Since the labeling of the X/Y matrix is part of the
configuration it perfectly customizes the user-interface
depending on application.
Alternatively partial files can be fired directly from panel
keys, GPIs etc. using the Event Trigger Setup of the
configuration software.
Riedel Communications GmbH | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90 | Fax: +49 (0) 202 292 - 99 99 | www.riedel.net
Riedel Communications GmbH | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90 | Fax: +49 (0) 202 292 - 99 99 | www.riedel.net