RIEDEL Master-Control-Room - Manual

Master Control Room
Product specifications are subject to change without notice. This material is provided for information purposes only; Riedel assumes no liability
related to its use. September 2004.
With this optional software package the individual
“conference intercom systems” or “4-wire conference
systems” found in many broadcast installations can be
easily replaced and integrated into the main intercom
system.
The GUI is typically operated by the master control room
personal and designed for fast and ease handling.
Up to 16 conferences are shown on the screen and
intercom ports (panels and 4-wire ports) can be
dragged and dropped to the conferences.
An integrated scheduler allows for preprogramming
the start of regular conferences, i.e. the daily editorial
conference at 9:00 am. The time for an automatic
dissolve can also be entered if required.
Powerful status information is provided by the GUI
including upcoming automated conference members
and vox indication per conference.
In parallel to the PC the system can also be operated
from one or multiple control panels.
Director Software Screenshot
Director Software Screenshot
All status information is shared system wide so that
the PC always shows the complete status information
including changes made from the panels and vice
versa.
Riedel Communications GmbH | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90 | Fax: +49 (0) 202 292 - 99 99 | www.riedel.net
Riedel Communications GmbH | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90 | Fax: +49 (0) 202 292 - 99 99 | www.riedel.net