RIEDEL RockNet 100 - Manual

RockNet 100 Series
RockNet 100 Series
RN.101.IO Microphone Pre-amp / Line Output
RockNet 100
RockNet 100 is the cost effective solution to enter the world
of RockNet digital audio networks. Based on the renowned
RockNet 300 technology, RockNet 100 provides the same
digital audio quality and ease of use with a reduced number of
80 channels. Of course all RockNet 100 devices are compatible
with the RockNet 300 series.
RockNet 100’s rugged steel enclosure is made for heavy
duty road use and offers the distinct advantage of magnetic
shielding. All connectors are gold plated. The circuit design is
streamlined to ultra low noise and minimum distortion to meet
the highest demands in audio quality.
I/O Section
The RN.101.IO provides 16 microphone/line input and 8
line output channels on XLR connectors. The circuit design
is optimized to maximize audio quality. The mic pre-amps
are similar to the highly acclaimed 300 series pre-amps and
WKHFRQYHUWHUVDUHFKDUDFWHUL]HGE\KLJKGHÀQLWLRQDQGZLGH
dynamic range based on proprietary technology.
Any input channel of the RN.101.IO can be remotely controlled by
digital mixing consoles or the RockWorks PC/Mac software:
- pre-amp gain adjustable between -6dB and +66dB in 1dB steps
- select 48V phantom power (with auto-mute)
- mute channel
The status of each input is displayed by four LEDs, indicating:
- mute [on/off]
- signal presence
- clip
- phantom power [on/off]
Each output channel can be controlled by the RockWorks software:
- output level adjustable between -9dBu and +24dBu in 1dB steps
- mute channel
The status is of each output is displayed by three LEDs, indicating:
- mute [on/off]
- signal presence
- clip