Milton CAT D100-6_S 100 kW EMCP4.2 Engine__Gen Control Panel - Manual

EMCP 4
LEHE0138-00
EMCP 4.2
GENERATOR SET
CONTROLLER
Caterpillar is leading the power generation market
place with power solutions engineered to deliver
unmatched performance, reliability, durability and
cost-effectiveness.
FEATURES
GENERAL DESCRIPTION
The Cat
®
EMCP 4.2 offers fully featured power
metering, protective relaying and engine and generator
control and monitoring. Engine and generator controls,
diagnostics, and operating information are accessible
via the control panel keypads; diagnostics from the
EMCP 4 optional modules can be viewed and reset
through the EMCP 4.2.
FULL RANGE OF ATTACHMENTS
• Wide range of system expansion attachments,
designed specifically to work with the EMCP 4.
• Flexible packaging options for easy and cost effective
installation.
WORLD WIDE PRODUCT SUPPORT
• Cat dealers provide extensive pre and post sale
support.
• Cat dealers have over 1,600 dealer branch stores
operating in 200 countries.
FEATURES
• A 33 x 132 pixel, 3.8 inch, graphical display denotes
text alarm/event descriptions, set points, engine and
generator monitoring, and is visible in all lighting
conditions.
• Textual display with support for 28 languages,
including character languages such as Arabic,
Chinese, and Japanese.
• Advanced engine monitoring is available on systems
with an electronic engine control module.
• Integration with the Cat Digital Voltage Regulator
(CDVR) provides enhanced system performance.
• Fully featured power metering, protective relaying,
engine and generator parameter viewing, and
expanded AC metering are all integrated into this
controller.
• Real-time clock allows for date and time stamping
of diagnostics and events in the control’s logs as
well as service maintenance reminders based on
engine operating hours or calendar days.
• Up to 40 diagnostic events are stored in the non-
volatile memory.
Image shown may not reflect actual package
• Ability to view and reset diagnostics on EMCP 4
optional modules via the control panel removes
the need for a separate service tool for
troubleshooting.
• Set points and software stored in non-volatile
memory, preventing loss during a power outage.
• Reduced power mode offers a low power state to
minimize battery power requirements.
• Three levels of security allow for configurable
operator privileges.
• Selectable units
− Temperature: °C or °F
− Pressure: psi, kPa, bar
−
Fuel Consumption: Gal/hr or Liter/hr
STANDARDS
• UL Recognized
• CSA C22.2 No.100,14, 94
• Complies with all necessary standards for
CE Certification
98/37/EC Machinery Directive
– BS EN 60204-1 Safety of Machinery
89/336/EEC EMC Directive
– BS EN 50081-1 Emissions Standard
– BS EN 50082-2 Immunity Standard
73/23/EEC Low Voltage Directive
– EN 50178 LVD Standard
• IEC529, IEC60034-5, IEC61131-3
• MIL STND 461