Milton CAT IT62H - Manual (Page 22)

22 IT62H Integrated Toolcarrier specifications
Dimensions – Pallet Fork
All dimensions are approximate.
3
1
4
2
5
7
6
8
Fork tine length mm 1524
in 60"
1 Overall length, fork level on ground mm 9116
ft/in 29'11"
2 Carriage reach, fork level on ground mm 1404
ft/in 4'7"
3 Tine height, minimum lift, fork level mm 82
in 4"
4 Carriage reach, lift arm and fork level mm 1948
ft/in 6'5"
5 Carriage reach, maximum lift, fork level mm 1090
ft/in 3'7"
6 Tine height, lift arm and fork level mm 1757
ft/in 5'9"
7 Tine height, maximum lift, fork level mm 3817
ft/in 12'6"
8 Overall reach, lift arm and fork level mm 3472
ft/in 11'5"
Static tipping load, straight with lift arm and forks level kg 9373
lb 20,667
Static tipping load, full 40º turn with lift arm and forks level kg 7945
lb 17,519
Operating weight * (§) kg 19 008
lb 41,913
* Static tipping loads and operating weights shown are based on standard machine configuration with 23.5R25 tires, full fuel tank,
coolants, lubricants, air conditioner, ride control and operator.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAE Standard J732C governing loader ratings.