Milton CAT IT62H - Manual (Page 20)

20 IT62H Integrated Toolcarrier specifications
Dimensions – Material Handling Bucket
All dimensions are approximate.
3
4 14
8 9
7 6
11
10
13 12
2
1
5
1 Height to top of ROPS 3452 mm 11'4"
2 Height to top of exhaust pipe 3369 mm 11'1"
3 Height to top of hood 2462 mm 8'1"
4 Ground clearance with 23.5R25 (see Tire Options chart for other tires) 412 mm 1'4"
5 B-Pin height – standard 4123 mm 13'6"
6 Center line of rear axle to edge of counterweight 2000 mm 6'7"
7 Wheelbase 3350 mm 11'0"
8 B-Pin height @ carry – standard 315 mm 1'0"
9 Center line of rear axle to hitch 1675 mm 5'6"
10 Rack back @ maximum lift 57.7
°
11 Dump angle @ maximum lift 49.4
°
12 Rack back @ carry 51.5
°
13 Rack back @ ground 44.2
°
14 Height to center line of axle 748 mm 2'5"
Tires
Tread width for 23.5-25 is 2140 mm (7'0")
mm inches mm inches kg lb kg lb
23.5R25 VSW BS L2 Radial 2862 113 6 0.2 – 20 – 44 – 14 – 31
23.5R25 VUT D2A BS L2 Radial 2866 113 10 0.4 –41 –90 –29 –64
23.5R25 XTLA MX L2 Radial 2801 110 7 0.3 –112 –247 –79 –174
23.5R25 VMT BS L3 Radial 2851 112 3 0.1 – 124 – 273 – 88 – 194
23.5R25 XHA MX L3 Radial 2784 110 0 0.0 – 0 – 0 – 0 – 0
23.5R25 XMINE MX L5 Radial 2807 111 26 1.0 – 872 – 1,923 – 619 – 1,365
750/65R25 XLD MX L3 Radial 2879 113 7 0.3 – 460 – 1,014 – 326 – 719
23.5-25 SGGL FS L2 Bias 2834 112 14 0.6 –472 –1,041 –335 –739
Width over tires
Change in
vertical
dimensions
Change in
operating weight
Change in static
tipping load