Milton CAT IT62H - Manual (Page 19)

19 IT62H Integrated Toolcarrier specifications
Service Refill Capacities
Fuel Tank – Standard 314 L 83 gal
Cooling System 42 L 11 gal
Crankcase 30 L 7.9 gal
Transmission 34 L 9 gal
Differentials and Final Drives – 36 L 9.5 gal
Front
Differentials and Final Drives – 36 L 9.5 gal
Rear
Hydraulic Tank 110 L 29 gal
Tires
Tires Choose from a variety
of tires to match your
application.
• Choice of:
23.5R25, L2, VSW
23.5R25, L2, VUT D2A
23.5R25, L2, XTLA
23.5R25, L3, VMT
23.5R25, L3, XHA
23.5R25, L5, XMINE
750/65R25, L3, XLD
23.5-25, L2, SGGL
• NOTE: In certain applications (such as load and carry) the
loader’s productive capabilities might exceed the tires’
tonnes-km/h (ton-mph) capabilities. Caterpillar recommends
that you consult a tire supplier to evaluate all conditions
before selecting a tire model. The 23.5-25 size range and
other special tires are available on request.
Cab
ROPS/FOPS Meets SAE and ISO
standards.
• Caterpillar cab with integrated Rollover Protective Structure
(ROPS) are standard in North America and Europe.
• ROPS meets SAE J1040 APR88 and ISO 3471:1994 criteria.
• Falling Objects Protective Structure (FOPS) meets SAE J231
JAN81 and ISO 3449:1992 Level II criteria.
• The operator sound pressure level measured according to
the procedures specified in ISO 6394:1998 is 72 dB(A) for the
cab offered by Caterpillar, when properly installed and
maintained and tested with the doors and windows closed.
• Hearing protection may be needed when operating with an
open operator station and cab (when not properly
maintained or doors/windows open) for extended periods or
in noisy environments.
• The sound pressure level is 111 dB(A) measured according
to the static test procedure and conditions specified in
ISO 6395:1998 for a standard machine configuration.