Milton CAT 345D L - Manual (Page 12)

Tool Control System. The optional
tool control system maximizes work
tool productivity by configuring
hydraulic flow, pressure, and operator
controls to match a specific work tool.
System versatility enables a wide
range of tools to be used.
Auxiliary Hydraulic Valve. A hydraulically
controlled auxiliary valve is standard on
the 345D L. Control circuits are available
as attachments, allowing operation of
high and medium pressure tools such as
shears, grapples, hammers, pulverizers,
multi-processors and vibratory plate
compactors.
Product Link. Product Link 321 is now
standard on the 345D L. The optional
levels of service, including Asset Watch,
Maintenance Watch, and Health Watch
allow you to monitor and maintain your
equipment for the lowest operating cost.
Control Levers. Three types of tool
controls are available to meet the
operator’s individual preference.
• Foot Pedal – The hydraulic modulated
foot pedal is used in conjunction
with the hydraulic controller.
• Foot Switch – The electric on/off
switch pedal is used in conjunction
with either the hydraulic controller
or attachment controller. The foot
switch is located on cab floor.
• Tool Controller Joystick – Two
types of the tool controller joysticks
are available. The joystick with the
modulation switch has two on/off
switches, one trigger switch and
one modulation switch. The joystick
without the modulation switch has
three on/off switches and one
trigger switch.
Machine Security. An optional Machine
Security System is available from the
factory on the 345D L. This system
controls when the machine can be
operated and utilizes specific keys
to prevent unauthorized machine use,
a significant theft deterrent.
12
Versatility
A wide variety of optional and factory-installed attachments are available to enhance
performance and improve job site management.