Milton CAT 924H - Manual (Page 13)

13
Standard VersaLink
Operating Specifications with Bucket
Coupler Buckets Pin-On Buckets
Bolt-On Cutting Edge Bolt-On Cutting Edge
Rated bucket capacity (§) m 3 1.8 2.1 2.8 1.8 2.1 2.8
yd 3 2.4 2.7 3.7 2.4 2.7 3.7
Struck capacity (§) m 3 1.5 1.7 2.3 1.5 1.7 2.3
yd 3 2.0 2.2 3.0 2.0 2.2 3.0
Bucket width mm 2550 2550 2550 2550 2550 2550
ft/in 8'4" 8'4" 8'4" 8'4" 8'4" 8'4"
10 Dump clearance at full lift and 45° discharge (§) mm 2828 2759 2621 2918 2849 2712
ft/in 9'3" 9'1" 8'7" 9'7" 9'4" 8'11"
14 Reach at full lift and 45° discharge (§) mm 992 1060 1197 885 957 1093
ft/in 3'3" 3'6" 3'11" 2'11" 3'2" 3'7"
Reach at 45° discharge and 2130 mm (7'0") mm 1516 1548 1603 1453 1491 1553
clearance (§) ft/in
5'0" 5'1" 5'3" 4'9" 4'11" 5'1"
Reach with lift arms horizontal mm 2296 2392 2586 2156 2255 2442
and bucket level ft/in 7'6" 7'10" 8'6" 7'1" 7'5" 8'0"
20 Digging depth (§) mm 64 72 89 64 70 87
in 2.5" 2.8" 3.5" 2.5" 2.8" 3.4"
6 Overall length mm 7147 7251 7460 7007 7112 7320
ft/in 23'5" 23'9" 24'6" 23'0" 23'4" 24'0"
13 Overall height with bucket at full raise (§) mm 5067 5194 5328 4966 5095 5152
ft/in 16'7" 17'0" 17'6" 16'4" 16'9" 16'11"
24 Loader clearance radius with bucket mm 5568 5597 5658 5530 5558 5616
in carry position (§) ft/in
18'3" 18'4" 18'7" 18'2" 18'3" 18'5"
Static tipping load straight (§) kg 8310 8126 7871 8738 8557 8272
lb 18,320 17,916 17,353 19,265 18,866 18,236
Static tipping load full 40° turn (§) kg 7276 7098 6859 7666 7490 7222
lb 16,041 15,647 15,122 16,900 16,512 15,923
Breakout force (§) kg 9857 9003 7706 11 336 10 250 8626
lb 21,731 19,848 16,989 24,992 22,597 19,017
Operating weight kg 11 501 11 635 11 744 11 379 11 515 11 638
lb 25,355 25,651 25,891 25,087 25,386 25,658
Static tipping and operating weights shown are for 924H with cab with A/C, optional counterweight, limited slip axles, heavy duty rear brakes,
additional guarding, sound suppression, work tool, 80 kg (176 lb) operator and Michelin 20.5 R25 L3 XHA tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers (SAE), including
SAE-Standards J732 JUN92 and J742 FEB85 governing ratings.
Other Ground Engaging Tools available, consult your Cat dealer.