Milton CAT D175-2 175 kW Controller Specifications - Manual (Page 4)

EMCP 3.2 GENSET CONTROLLER
OPTIONS
ANNUNCIATOR
The EMCP 3 Annunciator serves to display Genset
system alarm conditions and status indications.
The Annunciator has been designed for use on
the EMCP 3 Communication Network and may be
used in either Local (package mounted) or Remote
(up to 800 feet) application. A maximum of three (3)
Annunciators may be used with a single EMCP 3.2.
REMOTE MONITORING SOFTWARE
The EMCP 3 Remote Monitoring Software Package
is a PC based program which allows the user to
monitor and control a generator set, and is capable
of running on a Windows based operating system.
The Remote Monitoring software allows the user
to configure data monitoring and data acquisition
processes for monitoring, graphing, and logging
of genset data.
DISCRETE INPUT/OUTPUT MODULE
The Discrete Input/Output (DI/O) module serves
to provide expandable Input and Output capability
of the EMCP 3 and is capable of reading 12 discrete
inputs and setting 8 relay outputs. The DI/O Module
has been designed for use on the EMCP 3
Communication Network and may be used in
either Local (package mounted) or Remote (up to
800 feet) application. A maximum of four (4) DI/O
Modules may be used with a single EMCP 3.2.
308 mm
247 mm
57 mm
E M C P 3 . 2
G E N E R A T O R S E T C O N T R O L L E R
Information contained in this publication may be considered confidential.
Discretion is recommended when distributing. www.cat-electricpower.com
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE © 2008 Caterpillar
LEHE4942-02 (02-08) trade dress, as well as corporate and product identity used herein, are trademarks All Rights Reserved.
of Caterpillar and may not be used without permission. Printed in U.S.A.