Milton CAT D175-2 175 kW Controller Specifications - Manual (Page 2)

E M C P 3 . 2
G E N E R A T O R S E T C O N T R O L L E R
LEHE4942-02
2
● Set points & software are stored in nonvolatile
memory, preventing loss during a power outage.
● Compatibility with both mechanical and
electronic engines makes it versatile.
● True RMS sensing ensures AC metering accuracy
to within ± 1% of rated AC voltage (L-L and L-N)
and current.
● kW and kVA metering to within ± 5% of rating.
● Three levels of security allow for configurable
operator privileges.
● Single, standard 70-pin connector
COMMUNICATION
● J1939 (Primary Data Link)
● J1939 #2 (Accessory Data Link)
● MODBUS RTU (1/2 duplex); RS-485
(Customer Communication)
ENVIRONMENTAL SPECIFICATIONS
● Environmentally sealed front face rated for
IP56. Resistant to chemical splash, including:
diesel fuel, engine oil and machine oil.
● Protection level IP22 for rear of controller
● Resistant to salt spray
● Vibration: withstands 4.3G @ 24-1000 Hz
● Shock: withstands 15G
● Monitoring Functionality & Controls
Operational from –40° C to 70° C
(–40° F to 158° F)
● Display Operational from –20° C to 70° C
(–4° F to 158° F)
● Storable from –40° C to 85° C (–40° F to 185° F)
● 0 to 95% Humidity, non-condensing from 30° C
to 60° C (86° F to 140° F)
STANDARDS
● UL Recognized
● CSA C22.2 No.100,14, 94
● Complies with all necessary standards for
CE Certification
98/37/EC Machinery Directive
– BS EN 60204-1 Safety of Machinery
89/336/EEC EMC Directive
– BS EN 50081-1 Emissions Standard
– BS EN 50082-2 Immunity Standard
73/23/EEC Low Voltage Directive
– EN 50178 LVD Standard
● ISO3046, ISO8528
● IEC529, IEC60034-5, IEC61131-3
● MIL STND 461
CONTROLS
● Auto/Start/Stop
● Engine Cool-Down timer
● Emergency Stop
● Engine Cycle Cranking
● Lamp Test
● Generator Voltage
● Engine Speed/Generator Frequency
DIGITAL (LCD) INDICATION
● Generator AC Voltage – 3 phase (L-L & L-N)
● Generator AC Current (per phase & average)
● Generator Power kW (total & per phase)
● Generator kVAR (total & per phase)
● Generator kVAR-hr (total)
● Generator % of rated power (total)
(kW, kVA, kVAR)
● Generator kVA (total & per phase)
● Generator kW-hr (total)
● Generator Power Factor (PF)
(average & per phase)
● Generator Frequency
● Engine RPM
● Battery Voltage
● Engine Hours
● Engine Successful Start Counter
● Engine Oil Pressure
● Engine Coolant Temperature
● Engine Crank Attempt Counter
● Service Maintenance Interval
(Engine Operating Hours or Calendar Days)
● Real Time Clock
● Twenty (20) Event Fault Log
Notes:
1. Temperature indications are viewable in either
°C or °F (operator selectable)
2. Pressure indications are viewable in psi, kPa,
or bar
3. Fuel Consumption viewable in US/Imperial
gal/hr or Liters/hr
FEATURES/BENEFITS (CONT’D) STANDARD FEATURES