VEGA MoRoS Modem - ISDN 1.3 - Manual (Page 25)

MoRoS Modem - ISDN 1.3 Mounting
25
Disassemble the device from the DIN rail
Instructions on how to disassemble the MoRoS Modem - ISDN 1.3 from a
DIN rail in a cabinet:
You will need a Philips screwdriver with a 4.5 mm blade.
The power supply of the cabinet is switched off and secured against being
switched off accidentally.
All cables at the MoRoS Modem - ISDN 1.3 are disconnected.
Danger
Exposed electrical components!
Risk of death through electric shock hazard!
Prior to the disassembly, switch the power off and secure
it against being switched on again.
1. Insert the Philips screwdriver into the flexible snap-in hook of the MoRoS
Modem - ISDN 1.3 as shown in the diagram.
2. Turn the Philips screwdriver into the direction of the MoRoS Modem - ISDN
1.3 as shown in the diagram.