VEGA VEGAPULS 62 (≥ 2.0.0 - ≥ 4.0.0) 4 … 20 mA_HART - two-wire, approval according to LPR radio standard - Manual (Page 71)

Tracking speed of the measuring window
max. 1 m/min
Beam angle 3)
-
Horn antenna ø 75 mm (2.953 in) 10°
-
Horn antenna ø 95 mm (3.74 in) 8°
Emitted HF power 4)
-
Average spectral transmission power
density -34 dBm/MHz EIRP
-
Max. spectral transmission power den-
sity + 6 dBm/50 MHz EIRP
-
Max. power density in a distance of 1 m < 1 µW/cm²
Ambient conditions
Ambient, storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Process conditions
For the process conditions, please also note the specifications on the type label. The lowest value
always applies.
Seal Antenna impedance co-
ne Process temperature (measured on the process
fitting)
FKM (SHS FPM 70C3
GLT) PTFE -40 … +130 °C (-40 … +266 °F)
PTFE 5) -40 … +200 °C (-40 … +392 °F)
PEEK 6) -40 … +200 °C (-40 … +392 °F)
FFKM (Kalrez 6375) PTFE -20 … +130 °C (-4 … +266 °F)
PEEK -20 … +250 °C (-4 … +482 °F)
FFKM (Kalrez 2035) PTFE -15 … +130 °C (5 … +266 °F)
PEEK -15 … +210 °C (5 … +410 °F)
FFKM (Kalrez 6230) PTFE -15 … +130 °C (5 … +266 °F)
PEEK -15 … +250 °C (5 … +482 °F)
Graphite Ceramic -200 … +450 °C (-328 … +842 °F)
Vessel pressure - horn antenna
-
Antenna impedance cone PTFE -1 … 40 bar (-100 … 4000 kPa/-14.5 … 580 psig)
-
Antenna impedance cone PP -1 … 3 bar (-100 … 300 kPa/-14.5 … 43.5 psig)
3) Outside the specified beam angle, the energy of the radar signal has a level
which is reduced by 50 % (-3 dB)
4) EIRP: Equivalent Isotropic Radiated Power
5) Not with steam
6) Not with steam
VEGAPULS 62 • 4 … 20 mA/HART - two-wire, approval according to LPR radio standard 71
11 Supplement
41718
-EN
-120301