beautypg.com

3 adjustment, 4 packaging, transport and storage – VEGA PLICSRADIO R62 Wireless processing unit User Manual

Page 10

background image

10

3 Product description

PLICSRADIO C62 • Wireless processing unit for PLICSRADIO T62

32627-EN-130701

superordinate control system. The statuses of the switching inputs are

transferred to the integrated relays.
On instruments with one of the optionally available interfaces (RS232/

Ethernet), the measured values can be retrieved via modem or

network and displayed through a web browser. A measured value and

message transmission is also possible via e-mail/SMS.

Wide-range power supply unit with 20 … 253 V AC/DC for world-wide

use.
Detailed information about the power supply can be found in chapter

"Technical data".

3.3 Adjustment

The instrument can be adjusted with the following adjustment media:

With integrated display and adjustment unit

an adjustment software according to FDT/DTM standard, e.g.

PACTware and a Windows PC

The entered parameters are generally saved in PLICSRADIO C62,

when used with PACTware and PC also optionally in the PC.
Information:

When using PACTware and the corresponding VEGA DTM, additional

settings can be carried out which are not possible or only partly pos-

sible with the integrated display and adjustment unit. When using an

adjustment software, you either need one of the integrated interfaces

(RS232/Ethernet) or the interface converter VEGACONNECT.
Further instructions for setting up the web server and e-mail functions

can be found in the online help of PACTware or the PLICSRADIO C62

DTMs as well as the operating instructions manual "RS232/Ethernet

connection".

3.4 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

based on ISO 4180.
The packaging of standard instruments consists of environment-

friendly, recyclable cardboard. For special versions, PE foam or PE

foil is also used. Dispose of the packaging material via specialised

recycling companies.

Transport must be carried out under consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Voltage supply

Packaging

Transport

Transport inspection